Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 13 of 30
Figure 3: Home Screen
This section describes the function of the major controls and instrumentation associated with the Quick-Check. Do
not attempt to alter any controls or instrumentations; any changes without South-Tek Systems’ consent will void the
performance specifications unique to the system.
The PLC is used for the control sequence of the valves and controls the Quick-Check’s functionality. All programs are
proprietary and password protected from the factory.
Note: Controls for supporting equipment, such as the compressor, dryer, and/or nitrogen generator, are not
included in this section. Please consult the original manufacturer’s instructions for further information.
5.1
HOME SCREEN
The home screen displays relevant information regarding the Quick-Check and Zones such as system status, purity
status of each zone, current mode, and run hours. The user can manually start/stop and navigate to either the
“Menu”, “Zone Setup” by pressing the “Legend” button or “Zone Info” by pressing the “Purity”. The Zone Setup will
show which letter corresponds to each zone while the Zone Info will show the last purity readings of each zone.
5.2
POWERING ON/OFF
Powering On/Off all power to the unit can be done with an external power switch or disconnect, typically supplied by
others.
5.3
HMI INPUT FUNCTIONS
