Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 28 of 30
Red/Alarming
Exhaust port plugged
Check that exhaust tube is not blocked
O2 analyzer malfunction
Replace O2 analyzer
Flow Status Remains
Alarming
Too little or no flow to Quick-Check
Check APS flow settings and ball valve position
Valves, lines, or clear flow indicator
before the analyzer is blocked up
Check if system is blocked up
Lines are not connected/broken
coming from the AutoPurge System
Replace or reconnect lines
Valves are not actuating
Check solenoid valve wires/replace valves
11
KEY CONTACTS
For any questions with the performance and/or maintenance of the system, contact:
South-Tek Systems
2940 Orville Wright Way, Wilmington, NC 28409
Phone: 1-(888)-526-6284, Ext. 127
Email:
APPENDIX A: WARRANTY
The Quick-Check-PowerSaver Manifold is warrantied against any defects in workmanship and materials for 12 months
from the date of shipment from South-Tek Systems. The purchaser has the liability to ensure that the system is fully
inspected upon delivery and shall contact the appropriate shipping company to make any claims on damaged goods
due to transit within that shipping company’s policies. If the system is received with defects that are not due to
shipping, a written claim should be submitted to South-Tek Systems within 1 week of receiving the shipment. South-
Tek Systems can deny all other claims at their discretion.
All warranty work shall be done at a South-Tek System facility or at a PSA Nitrogen Generator Authorized Service
Center. Only factory trained and authorized personnel are covered under warranty. Any part that is returned /
repaired / replaced under warranty may be remanufactured or changed to a different specification at the factory’s
option. Any work performed by an unauthorized person/company or usage of non-factory parts, may void all
warranties to the product.
Any item not manufactured by South-Tek may carry its own warranty from its manufacturer and will be warrantied
under that manufacturer. All parts that need to be returned should be announced. Any item(s) that is returned to
South-Tek Systems without an RMA number (return authorization number) may be denied and returned to the
sender. Contact the factory for RMA #’s, prior to returning shipment.
