Quick-Check-PowerSaver Manifold 6 Port South-Tek Systems
Revision: 0
Revision Date: 8/2/17
Page 19 of 30
Figure 13: Remote Access Communication Setup
Figure 14: Loading Image
1.
Open the Remote Access Software and go to the “Configurations >Communication - PC settings”.
2.
Select Connection Type: TCP/IP (Call)
3.
Press the red folder to bring up the TCP/IP Addresses setup.
4.
Enter in the static IP address assigned to the controller under “IP
Address” column.
5.
Select “TCP” under “Protocol” column.
6.
Enter in the PLC Name (found on the 2
nd
page of the hard copy
manual included with the Quick-Check).
7.
Press the “Get OPLC Information” to make sure the connection
information is correct. An error message will appear if the
information is incorrect.
8.
Press “Exit” once the connection information has been confirmed.
Loading Image File and Logging on
1.
Open the Remote Access Software and go to the “Configurations
> Select Fonts and Images file (*urc)”.
2.
Browse for the file “PLC Image File.urc” which is loaded onto the
SD card.
3.
Press the “Glasses” icon in the left corner of the software to
establish real time connection with the controller.
SD Card Access
The setup SD Card Access file will also be included on the microSD card installed in the PLC. The SD Card Explorer
software can be installed on any windows based PC with Windows 7 or higher. This allows the user to have access of
the files on the SD card without having to physically remove the SD card. Set up the communication similar to how
the Remote Access is set up.