-40-
For Machines Mfd. Since 10/21
South Bend Tools
Model SB1118
M A I N T E N A N C E
The infeed and outfeed rollers receive the
transferred power from the cutterhead through
the drive chain system on the left side of the
machine, as shown in Figure 43.
Use shop rags and mineral spirits to clean away
any debris and grime, then brush a light coat
of multi-purpose grease onto the chains and
sprockets.
Drive Chains & Sprockets
Grease Type .......... T26419 or NLGI#2 Equivalent
Amount ................................................... Thin Coat
Frequency .............. Every 160 Hours of Operation
Drive chain and sprockets
On the right-hand side of the headstock, the
outfeed roller chain ensures synchronous
movement of both rollers (see Figure 44).
The table leadscrews are adjusted by the drive
chain and synchronized by the table height chain
and sprockets located underneath the planer
base (see Figures 45–46). Use shop rags and
mineral spirits to clean away debris and grime,
then brush a light coat of multi-purpose grease
onto the chains and sprockets.
Table Height Chains & Sprockets
Grease Type .......... T26419 or NLGI#2 Equivalent
Amount ................................................... Thin Coat
Frequency .............. Every 160 Hours of Operation
Figure
Figure 44. Location of outfeed roller chain.
. Location of outfeed roller chain.
Outfeed Roller
Outfeed Roller
Chain
Chain
Figure
Figure 46. Location of handwheel chain.
. Location of handwheel chain.
Handwheel Chain
Handwheel Chain
Figure
Figure 43. Headstock cover raised and upper left-hand
. Headstock cover raised and upper left-hand
panel removed to expose drive chains and sprockets.
panel removed to expose drive chains and sprockets.
Drive
Drive
Chains
Chains
Sprockets
Sprockets
Figure
Figure 45. Location of table height chains and
. Location of table height chains and
sprockets.
sprockets.
Drive Chain
Drive Chain
Table Height Chain
Table Height Chain
Leadscrew
Leadscrew
Sprockets
Sprockets
Idler
Idler
Sprocket
Sprocket
