-72-
For Machines Mfd. Since 12/20
South Bend Tools
Model SB1108/SB1109
P A R T S
SB1109 Labels & Cosmetics
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
WARNING!
!
INJURY HAZARD
Keep cover closed
while machine is
operating.
Disconnect power
before removing or
servicing.
Add SAE 30 oil every 24 hours of operation.
NOTICE
SB1109
WARNING!
!
INJURY HAZARD
Keep cover closed
while machine is
operating.
Disconnect power
before removing or
servicing.
NOTICE
For shipping purposes,
some inventory
components are packed
inside cabinet. Remove
cabinet panels to access
these components.
South Bend Tools
POWER
STOP
START
FEED SPEED
– +
28 FPM
10 FPM
Made in Taiwan to South Bend Specifications
WARNING!
!
MODEL SB1109
20" Planer w/Helical Cutterhead
MFG Date
Serial No
Main Motor: 5 HP, 220V, 1-Ph, 60 Hz
Full-Load Current Rating: 23A
Cutterhead: 4 Spirals, 92 Inserts
Replacement Inserts: H9893
Cutterhead Speed: 5000 RPM
Feed Rates: 10–28 FPM
Max. Depth of Cut: 1/8"
Min. Stock Thickness: 1/4"
Min. Stock Length: 7"
Max. Cutting Width: 20"
Max. Cutting Height: 8"
Weight: 719 lbs.
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses, hearing protection, and respirator.
3. Disconnect power before changing blades, removing parts, or doing maintenance,
service, or adjustments.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly set up before starting.
7. Do not plane two boards of varying thickness at the same time.
8. Never plane material smaller than 7" long, 3/4” wide, or 1/4" thick.
9. Do not allow hands or clothing to get pulled into cutting area while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Inserts are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area while machine is running.
14. Keep fingers clear of pinch point between stock and table.
15. Do not operate when tired or under influence of drugs or alcohol.
16. Do not expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
SINCE
1906
INJURY HAZARD
Do not use machine
if you have not read
the manual. Visit
southbendtools.com
or call 360-734-1540
to get a manual.
WARNING!
!
WARNING!
!
!
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING!
!
INJURY HAZARD
To reduce risk of
short- and long-term
injury, wear eye,
ear, and lung
protection when
using this machine.
301
304
302
305
301
304
306
309
311
312
300
310
308
307
303
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Tools at
(360) 734-1540 or www.southbendtools.com to order new labels.
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
300
PSB1109300
MODEL NUMBER LABEL
307
PSB1109307
TOUCH-UP PAINT, SB GRAY
301
PSB1109301
DOOR CLOSED LABEL 2.5 X 1.5
308
PSB1109308
TOUCH-UP PAINT, SB LIGHT BLUE
302
PSB1109302
STOP OIL FILL TAG
309
PSB1109309
MACHINE ID LABEL
303
PSB1109303
TOUCH-UP PAINT, SB DARK BLUE
310
PSB1109310
SOUTH BEND NAMEPLATE 6"
304
PSB1109304
ELECTRICITY LABEL 0.7
311
PSB1109311
CONTROL PANEL LABEL
305
PSB1109305
ADD OIL NOTICE
312
PSB1109312
INVENTORY SHIPPING NOTICE
306
PSB1109306
COMBO WARNING LABEL
