SERVICE
South Bend Tools
For Machines Mfd. Since 10/20
Model SB1100 & SB1101
-41-
S E R V I C E
Pairing Remote
Control & Receiver
The Model SB1100 & SB1101 are equipped
with a remote control receiver that can be
programmed to operate up to 16 separate
controllers.
Avoid touching electrified parts inside receiver
while performing procedure below! Touching
electrified parts will result in personal injury
including but not limited to severe burns,
electrocution, or death. Use a wood dowel or
other non-conducting item to push button on
receiver.
1.
Remove switch cover to get a clear view of
remote receiver (see Figure 80).
Figure 80. Location of receiver in switch box.
Receiver
Pairing Remote
Items Needed
Qty
Phillips Head Screwdriver #2 ...............................1
Wood Dowel ...........................................................1
2.
Press and hold green ON button on remote
control (see Figure
81) until LED indicator
illuminates on remote receiver (see Figure
82).
3.
Press pairing button on receiver with a
non-conducting tool, then release when LED
indicator turns off (see Figure 82). Pairing
is complete.
Figure 82. Remote receiver.
Pairing Button
LED
Indicator
1.
Remove switch cover to get a clear view of
remote receiver (see Figure 80).
2.
Press and hold green ON button on remote
control for eight seconds, then wait for LED
indicator to flash three times.
Unpairing Remote
Figure 81. Remote control.
ON Button
OFF Button
