-18-
For Machines Mfd. Since 10/20
South Bend Tools
Model SB1100 & SB1101
P R E P A R A T I O N
13. SB1101 Only:
Repeat Steps 11–12 with
second collector.
10. SB1101 Only:
Repeat Step 9 with second
canister support (see Figure 17).
Figure 15. Switch box mounted on outlet tube.
x3
x2
x2
11.
While an assistant holds collector, insert
square gasket between collector and outlet
tube, then secure collector to outlet tube with
(8)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see Figure 18).
IMPORTANT:
Collector must be oriented so
canister support aligns with mounting holes
on collector.
12.
Attach canister support to collector with (2)
5
⁄
16
"-18 x
3
⁄
4
" flange bolts (see Figure 18).
Figure 18. Collector attached to outlet tube and
canister support.
x2
Square
Gasket
Collector
Outlet Tube
9.
Attach canister support to base with (2)
5
⁄
16
"-
18 x
1
⁄
2
" flange bolts (see Figure 16).
Figure 16. SB1100 canister support.
x2
Canister
Support
Figure 17. SB1101 canister support.
x4
Canister
Support
(1 of 2)
5.
Attach pressure gauge to gauge bracket
using (2)
1
⁄
4
"-20 x
1
⁄
2
" button head cap screws
and
1
⁄
4
"-20 flange nuts (see Figure 15).
6.
Attach gauge bracket to outlet tube with (3)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts using remaining
mounting holes (see Figure 15).
7.
Loosen existing Phillips head screws and
remove switch box cover from switch box (see
Figure 15).
8.
Attach switch box to gauge bracket with (2)
10-24 x
3
⁄
4
" Phillips head screws and 10-24
hex nuts (see Figure 15).
