Figure 3. Safety and support features.
Figure 2. Tables and fence.
-4-
For Machines Mfd. Since 10/20
South Bend Tools
Model SB1091
I N T R O D U C T I O N
P. Cutterhead Guard:
Covers cutterhead until
workpiece pushes guard during operation.
When workpiece leaves cutterhead, guard
springs back to its starting position, keeping
cutterhead covered to minimize risk of
accidental contact.
Q. Rabbeting Extension:
Provides workpiece
support during rabbet cutting.
R. Knee Stop:
Stops power to motor when
pressed. Can be pressed with your knee if
both hands are holding workpiece.
S. Depth-of-Cut Scale:
Shows depth of cut (per
pass).
Safety & Support
P
Q
R
S
I. Outfeed Table:
Supports workpiece after it
passes over cutterhead. For optimum results,
outfeed table must be adjusted evenly with
highest point of cutterhead insert rotation or
top dead center (TDC).
J. Fence:
Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel jointing.
K. Infeed Table:
Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead inserts determines
depth of cut.
L. Outfeed Handwheel:
Raises or lowers the
outfeed table.
M. Outfeed Table Lock:
Tighten to secure
outfeed table position; loosen for table
adjustment.
N. Infeed Handwheel:
Raises or lowers the
infeed table to control depth of cut.
O. Infeed Table Lock:
Tighten to secure infeed
table position; loosen for table adjustment.
Tables & Fence
I
M
O
J
K
L
N
