Soundstage STAGE-AT312, User Manual

Page: 5 / 13

5
1
2
3
962 mm
~50mm/2.0”
~3mm/0.12’
~3mm/0.12”
4mm/
0.16”
>25mm/0.98”
5
6
Basic Operation
Wall Mounting
Standby/ON
When you first connect the main unit to the mains socket,
the main unit will be in Standby mode.
• Press the button on the unit or on the remote control
to switch the unit ON.
• Press the button again to switch the unit back to
STANDBY mode.
• Disconnect the mains plug from the mains socket if you
want to switch the unit OFF completely.
Select Modes
• Press the (SOURCE) button on the unit or press
the AUX , , OPT/COA , HDMI 1/2 , HDMI eARC buttons
on the remote control to select the desired mode. The
selected mode will show on the display.
Adjusting the Bass/Treble Level
• Press the
BASS +/-
buttons on the remote control to
adjust bass level.
• Press the /- buttons on the remote control to
adjust treble level.
Turn the Surround Sound ON/OFF
• Press the VERTICAL/SURROUND button on the remote
control to turn on the surround sound. Press this button
again to turn off the surround sound.
Select Equalizer (EQ) Effect
• Press the
SOUND MODE
button on the remote control
to select your desired preset equalizer effects:
GAME, MOVIE, VOICE, MUSIC.
Adjust the Volume
• Press the +/- (volume) buttons to adjust system’s
volume level.
• Press
SUB/-
buttons on the remote control
to increase or decrease the subwoofer’s volume level.
• If you wish to turn the sound off, press the (MUTE)
button on the remote control. Press the (MUTE)
button again or press the +/- (volume) buttons on
the unit or on the remote control to resume normal
listening.
Adjust the Brightness
• Press the DIMMER button on the remote control to
select brightness level.