Soundstage STAGE-AT312, User Manual

Page: 6 / 13

6
Auto-Standby Feature
7
Your sound bar has been programmed to enter Standby mode automatically when no audio is detected for 15 minutes.
For example, this would happen when pausing playback, or should the sound bar be left on accidentally.
To disable this feature, please follow the steps below:
1. Ensure the sound bar is in Standby state (power OFF)
2. Pointing the remote at the sound bar, press Volume Down, then the Left key, and nally Mute.
3. The display should read “
ASOFF
”, for Auto-Standby OFF.
Follow the same steps as above to activate the feature once again, this time displaying “ ASON ” for Auto-Standby ON.
Repeating these steps will toggle the feature ON and OFF.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks
or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright ©
2012-2021 Dolby Laboratories. All rights reserved.