7
ENGLISH
ZEUS II series User manual
4. FRONT PANEL DESCRIPTION
10
0
CHANNEL 1
10
0
CHANNEL 2
POWER
FAULT
CLIP
SIGNAL
FAULT
CLIP
SIGNAL
POWER
ZEUS
H-2700
2700W Class-H Professional Power Amplifier
1
2
2
3
3 4
5
5
6 6
7
1)^POWER Switch
Press the switch to the (1) position to turn ON the amplifier and to the (0) position to
turn it OFF.
Note: When the power switch is turned OFF, the device is not completely
disconnected from the mains. So if the amplifier is not used for a long time,
please disconnect the power cord from the outlet.
2)^LEVEL CONTROLS
Two knob level controls,one for each channel.
3)^SIGNAL indicator
Two green LEDs, each assigned to one channel. When the input signal exceeds 40 dB,
the LEDs light up.
4)^Power indicator
The green LED, when lit, indicates that the amplifier has been turned on and AC power
is available.
5)^FAULT indicator
Two red LEDs, each assigned to one channel. When LEDs light up it means that the
correspondent channel is shutdown.
6)^CLIP indicator
Two yellow LEDs, each assigned to a channel, indicate when the corresponding channel
has an output overload. Some flashing may be normal but if these LEDs remain on for a
long time, please reduce the input signal levels until the LEDs turn off.
7)^VENTILATION grille
It allows constant ventilation between the front and back of the amplifier.
