14
ENGLISH
ZEUS II series User manual
8.3. A-300, A-600, A-900 - BRIDGE MODE
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, REPLACE FUSE
ONLY WITH SAME TYPE
F15A-250V.
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
CH-A
CH-A
BRIDGE
CH-B
CH-B
OUTPUTS
INPUTS
LIMITER
MODE
GROUNDLIFT
ON
OFF
BRIDGE
STEREO
LIFT
GND
Input Impedence:
20K Balanced / 10K Unbalanced
GND
BRIDGE
A
B
MONO
PINOUT
CH-B
CH-A
BRIDGE
CH-A
LOUDSPEAKER
1+
1-
2-
2+
-
SPEAKON BRIDGE
LOUDSPEAKER SIDE
MODE
BRIDGE
STEREO
+
MIXER
BRIDGE mode with a mono input and a mono output, allows you to add the respective
signals of the two amplification channels and make them available on a single output.
The input signal of channel A will be present on the Speakon of the BRIDGE OUTPUT.
Use the channel A control to adjust the volume. To set the amplifier in the BRIDGE
MODE, set the MODE selector to the BRIDGE position (top) and connect the output as
shown above. Do not use the black binging posts when the amp is being operated in
BRIDGE MODE
Concerning the cable wiring of BRIDGE MODE please refer to paragraph 8.4 BRIDGE
MODE CABLE WIRING on page 15.
