12
ENGLISH
ZEUS II series User manual
8.1. A-300, A-600, A-900 - STEREO MODE
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, REPLACE FUSE
ONLY WITH SAME TYPE
F15A-250V.
MADE IN P.R.C.
S/N:
ZEUS SERIES
POWER AMPLIFIERS
230V - 50/60Hz
WARNING! ONLY USE THE
POWER CABLE SUPPLIED
WITH THIS PRODUCT
CH-A
CH-A
BRIDGE
CH-B
CH-B
OUTPUTS
INPUTS
LIMITER
MODE
GROUNDLIFT
ON
OFF
BRIDGE
STEREO
LIFT
GND
Input Impedence:
20K Balanced / 10K Unbalanced
GND
BRIDGE
A
B
MONO
PINOUT
CH-B
CH-A
BRIDGE
CH-A
LOUDSPEAKER 1
1+
1-
2-
2+
-
SPEAKON
LOUDSPEAKER SIDE
CHANNEL A
MODE
BRIDGE
STEREO
+
MIXER
CH-B
LOUDSPEAKER 2
1+
1-
2-
2+
-
+
SPEAKON
LOUDSPEAKER SIDE
CHANNEL B
In STEREO MODE you have:
•
Separate A and B channel inputs
•
Separate A and B channel outputs
•
Each channel has its level control.
This is the typical setting for amplifying stereo signals. The input signal of channel A will
be present on the output speaker of channel A and the input signal of channel B will be
present on the output speaker of channel B.
To set the amplifier in STEREO MODE, the MODE selector should be set to the STEREO
position (bottom) and connect the outputs as shown above. Concerning the cable wir-
ing of STEREO MODE please refer to paragraph 8.2. STEREO / PARALLEL MODE CABLE
WIRING on page 13.
