tween receiver and transmitter.
3. TFT Color Display
: It shows all functions and allows easy and intuitive program-
ming of all parameters.
4. IR Switch
: Press it to synchronize the operating channel between receiver and
transmitter.
5. Unlock Button
: It locks/unlocks the system in order to avoid accidental setup
parameters changes.
6. Setup Knob/Button
: It access to all editing functions, etc. (See section “8. SYSTEM
INSTALLATION” at page 14 for further details).
7. Volume Knob
: It increases or decreases the output level of BALANCED and MIX
outputs.
8. Antenna-A
: It receives RF signals from the transmitter.
9. Antenna-B
: Same as Antenna-A, it receives RF signals from the transmitter.
10. Mix Output
: It is the unbalanced audio line output with ¼” Jack to use in case of
connection to mixers or audio equipment with unbalanced connections.
11. Balance Output
: It is the balanced XLR audio line output to connect to your mixer
or audio system. For more details about the internal wiring of balanced cables,
refer to paragraph “9. AUDIO CABLES” at page 18.
12. DC Input
: Connect here the external power supply (12Vdc – 1A)
13. USB Charge Outlet
: Use this port to charge the hand-transmitter rechargeable bat-
tery by connecting the USB charge cable to the USB-mini connector on transmitter
bottom.
5.1. Receiver Display
RF indicates signal intensity. AF indicates audio level. The longer the
bar is, the stronger the signal is
9
ENGLISH
WF-D190 MKII User manual
