8. SYSTEM INSTALLATION
8.1. Receiver Placement
Before using the system, please be
sure that the receiver is correctly
placed at a distance of about 1m from
floor, and 1m from walls or other big
physical obstacles (columns or other
radio-frequency equipment).
f
Install the two antennas (8) and
(9), make them to be perpendicu-
lar with the receiver.
f
Connect the supplied power
adapter to the DC power supply
socket (13). Make sure that the
adapter is suitable before using
the Receiver.
f
Connect the balanced audio output (10) or the unbalanced (11) to your mixer or
sound system, using the appropriate cables (see section “9. AUDIO CABLES” at page
18 for further details).
f
Connect the USB charge cable (attached) to the USB socket (12) while the other side
connect to the handheld microphone. Charge battery until the display shows “FULL”,
meaning that the battery is successfully charged.
NOTE: Rechargeable function is available only on handheld microphones
(WF-D190H MKII systems). Also notice that battery is charged even though
the system in switched off but connected to mains.
f
Turn on the receiver by pressing the POWER button (1); the LCD (3) will light up
showing the current settings of the system.
NOTE: Before switching on the Receiver, turn the volume control knob to
minimum, adjust the volume as needed when the Receiver is working.
Please notice that when you switch on the receiver LOCK function is active. Hold for
two seconds UNLOCK button to unlock it and have access to all parameters. LOCK icon
will turn off. In addition to the active LOCK function, at power on the receiver is even
muted ( icon is on) until you turn on the transmitter and align it on the same receiv-
er’s channel.
8.2. Group/Channel Manual Setting
After unlocking the receiver, the LOCK icon will turn off, indicating that you can select
one of the 10 groups and one of the 9 frequencies in each group.
Beyond 1m
from ground
Beyond 1m
from walls
14
ENGLISH
WF-D190 MKII User manual
