SETUP
- Select a pad which is affected by cross talk-
ing by pressing its pad select buttonor strike
the pad, its icon and button indicator will blink
as well.
- Rotate the DATA knob to change the cross
talk value ranged 0 - 100. The smaller the
value, the less the pad will be affected by
crosstalk. However, if the value is too low,
it
’
ll be harder to get the pad to generate its
sound when you hit it. You should balance it
carefully.
- Press the ENTER button to confirm your
setting. The display will stay on the Cross
Talk setting for the current source pad.
You could select another pad which is also
affected by the current pad and continue
your setting.
- Press the EXIT button to exit current
operation and back to Advanced menu.
Cross Talk
Pad affected by cross talk
2
1
3
Hi-Hat Pedal Setting
Strike the Hi-Hat pad without pressing the Hi-Hat control pedal to make open Hi-Hat sound (voice No.
240 - 258).
The Hi-Hat pedal has two zones for sound control, which is divided by Close Threshold point. Strike
the Hi-Hat pad while pressing the Hi-Hat control pedal gradually to make consecutive open to close
Hi-Hat sound when pedal position is higher than close threshold. When pedal position is lower than
close threshold, striking the Hi-Hat pad makes close Hi-Hat sound (voice No. 215 - 239).
When press the pedal quickly and reach bottom position, it'll make Hi-Hat pedal sound (voice No. 259
- 265) and you don
’
t need striking the Hi-Hat pad. The quicker the pressing, the higher the volume of
the pedal sound. This bottom position is determined by Pedal Threshold.
2
1
3
your comfortable pressing strength.
The Close Threshold and Pedal Threshold
can be adjusted in the Sensitive settings by
pressing the H.PEDAL button; the Pedal icon
will blink. The parameter will be "Close THR"
and its current close threshold will be shown
. Press the ENTER button to confirm.your
Close THR
The scale of Hi-Hat pedal movement is 0 -
127. 0 represents the lowest position of the
pedal (completely pressed) and 127 repre-
sents the highest position (completely
raised).
This feature allows you to set thresholds per
22
