Sound Devices PIX 220i User Manual And Technical Information Download Page 50

Page: 50 / 75

Storage Devices

Supported Storage Devices

Sound Devices maintains a list of storage devices that are approved for use with the PIX recorders.

An up-to-date list of supported storage devices can be found online:

http://www.sounddevices.com/ap-

proved

Approved mechanical drives are recommended for use only in stationary applications. Excessive vibration
or motion may cause data corruption when using mechanical drives.

PIX-CADDY

The PIX-CADDY allows for simple, quick, and solid connection and removal of drives for file stor

age and exchange. When connected to a PIX recorder, whether powered on or off, the caddy’s USB

3.0, FireWire 800 connections are disabled. When the PIX-CADDY is removed from a PIX recorder, it

operates as a high-speed data interface for transferring files from the drive to a computer. Only one

data connection can be used at a time. See PIX-CADDY documentation for details on attaching a 2.5”

drive to the PIX-CADDY.

eSATA

An external storage device can be used instead of the PIX-CADDY. When the PIX-CADDY is re-

moved, the eSATAp is exposed. An external storage device with an eSATAp connector can be

attached to the PIX recorder’s eSATAp Connector with a standard eSATAp cable. The drive in the

enclosure must be an approved drive.
This port can be used to power an external drive via 5V eSATAp, or it can be used with powered

external enclosures using an eSATA (non-powered) cable.

PIX 220i and PIX 240i Video Recorder User Guide and Technical Information

v. 3.51

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Stor

e De

vices

Summary of Contents for PIX 220i












































































Search results

Summary of Contents for PIX 220i

Reviews:

Related manuals for PIX 220i

Brands by name

Popular brands

Sound Devices PIX 220i, User Manual And Technical Information

Search results

Summary of Contents for PIX 220i

Reviews:

Related manuals for PIX 220i

Brands by name

Popular brands