The Bio Tuner Model BT8 Manual
© 2012-2018 SOTA Instruments Inc.
Page 7 of 9
|
www.sota.com
Intensity Level:
The intensity should always be set to a comfortable level. Be sure to
reduce the intensity before changing modes. After the new mode is selected, readjust
the intensity.
With Extended Use:
It is recommended to vary the Mode from time to time.
Sensitive skin:
During the first weeks of use, the skin may become irritated. Over
time, irritation usually decreases or disappears. Apply a healing lotion after use if the
ear lobes become red or irritated.
Drink plenty of water:
It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
Stop Gradually:
Reduce the amount of time each day for the last week of use.
CHANGING THE CONDUCTIVE RUBBER ELECTRODES
1. Remove the Ear Clips from the Cord.
2. Gently pull the black Conductive Rubber Electrodes out of the Ear Clips.
3. Insert the new Conductive Rubber Electrodes into the Ear Clips. Press the
Electrode into place.
OUTPUT OF SIX MODES
The Bio Tuner provides six different Modes with which to experiment and discover
what feels or works best. Try different Modes to determine which feels most
comfortable. With extended use, it is recommended to vary the Mode from time to
time, as your body can become acclimatized.
One Mode is not considered more beneficial than another.
In all Modes, the base frequency of 1,000 Hz pulse-modulated by 111.11 Hz is present.
Modes 4, 5, and 6 may have a more gentle feel.
See Table of Modes on page 8.