The Bio Tuner Model BT8 Manual
© 2012-2018 SOTA Instruments Inc.
Page 5 of 9
|
www.sota.com
All the lights will flash once, before starting the unit in
Mode 1. If the lights do not come on, the battery may
not be placed correctly.
10. Gradually turn up the intensity to a comfortable
level. The intensity should be comfortable. See ‘How It
Should Feel’ on page 6.
11. Change modes by pushing the Mode button. The
GREEN light indicates which
Mode is selected and that the
timing has started. See Mode information on page 7.
12. After the 20-minute timed session, the unit will
automatically cycle into Sleep Mode and the GREEN Mode
light will flash every 2 seconds.
13. While in Sleep Mode the battery is still being used. Either
reset to continue or turn the unit OFF.
a. To reset, push the Mode button for another timed session.
Before resetting for a second timed cycle, wet the Ear
Clips again.
b. To turn the unit OFF, rotate the ON/OFF switch counter
clockwise until it clicks. Do not force the ON/OFF switch
past its natural stopping point.
14. Unplug the Cord. Do not store the unit with the Cord plugged in as this can damage
the Cord.
Notes:
Ear Clips:
The Ear Clips may feel more comfortable with the use of either a
conductive gel or aloe vera gel rather than water. Over time, the Ear Clips may lose
their conductivity and will need to be replaced.
Changing Modes:
When the Mode is changed during a timed session, the timing
continues without interruption to complete a session of approximately 20 minutes.
Output:
The YELLOW light is used to test the output of the unit. During normal
operation, when the unit is turned ON and the Ear Clips are positioned correctly,
the YELLOW light may or may not come on. As long as the current is felt, the unit is
operating correctly, regardless of the YELLOW light.
5
4