Sorvall TC6, Service Manual, Page: 25 / 109

TC6 ® System Descriptions
3-1
Section 3: SYSTEM DESCRIPTIONS
3-1. General System Description
The TC6 ® is an assembly that consists of the following:
• Power System
• Drive Motor System
• Control System
• Input/Output System
• Cabinet System
• Ventilation System
• Containment System
The Power System consists of the cord, voltage selector (SN 9501733
and below), power supply, and electrical connectors. It takes elec-
tricity from the electric outlet, converts it to low voltage and then
distributes it to the other instrument systems.
The Drive Motor System consists of the motor, drive electronics and
drive mount hardware. It receives controlled voltage from the control
system to spin the rotor while providing support for itself and the
rotor system.
The Control System consists of electrical circuits that are located on
printed circuit boards to control operation of the motor speed, the
timer and the latch mechanism.
The Input/Output System is a user interface system that consists of
knobs, switches, and displays. It allows the user to input run
parameters and also monitors a run in progress.
The Cabinet System consists of the upper and lower frame sections.
This system forms the main body of the centrifuge and supports the
other instrument systems.
The Ventilation System consists of a fan, gaskets and baffles. It
directs air movement in the centrifuge to cool the circuits and motor
and also seals the rotor chamber to minimize windage.
The Containment System consists of radial and vertical containment
sub-systems. The radial sub-system is the guard and containment
rings and their supports. The vertical containment sub-system is
the door, latch and striker, and the mounting hardware. The
containment system is designed to contain any parts or fragments
that may result from a rotor failure.