6.1
GENERAL
SECTION 6
DRAWINGS AND PARTS LISTS
This section provides a coded replaceable parts list keyed to both the schematic
diagrams and assembly drawings (Figures 6-1 through 6-12). Tables 6-1 through
6-3 summarize the part numbers of all identified components. Figure 6-1 is the
printed circuit board
(PCB)
schematic diagram.
Figures 6-2 and 6-3 physically
locate parts on the
PCB
and chassis frame respectively.
Figures 6-4 through
6-11
are final assembly schematic diagrams for each of the
units in the series. Included in these schematics are alternate connections for Tl
and
T2
primaries for
208, 220,
and
230
Vac inputs.
CAUTION
Do not reconnect for these voltages unless parts
Per Table 6-2 (page 6-17) are also changed.
Figure
6-12
is the Over Voltage Protector schematic and parts location drawing.
6.2
PARTS
LIST COLUMN HEADINGS DEFINED
Tables
6-1, 6-2
and
6-3
identify parts for all units in the series, tabulated as
fol
lows:
6.2.1
Circuit Symbol;
Component identification on the respective schematic diagram.
6.2 .2
DCR-B Model;
Separate column for each model in the series.
6.2.3
Description;
Basic item, its value and electrical characteristics.
6.2.4
Sorensen P /N ;
The number to be used when ordering parts. Call Sorensen at 1-800-525-2024, or
order directly from:
SORENSEN
Sales & Technical Support
9250 Brown Deer Road
San Diego, CA 92121-2294
1-800-525-2024
Tel: (858) 450-0085
Fax: (858) 458-0267
Email:
www.sorensen.com
6-1
Rev B (6/84)
