35
Basic Operations of the Function Menu
Chapt
er
3
Pre
para
tio
ns
a) This is displayed only when TCG on page P4 TC of the function menu is
set to “INT”, and PRST/RGN is set to “PRESET”.
P1 INPUT page
P2 INPUT page
P3 AUDIO page
F5: MONITR R Selects the channel to monitor as the right
monitor channel.
CH1, CH2, CH3, CH4, CH5, CH6, CH7,
CH8
CH1/2, CH3/4, CH5/6, CH7/8 (MIX)
F6: OUT REF
Selects the reference signal for the output
signals of this unit.
REF:
Use the signal input to the REF.
VIDEO INPUT connector as the output
reference signal.
INPUT:
Use the input video signal as the
output reference signal.
Item
Setting
F1: INT SG
Set whether to select test signal from
internal signal generator.
OFF:
Do not select.
ON:
Select.
F2: V INPUT
Selects the video input signal.
HDSDI:
HDSDIsignal
SDSDI:
SDSDI signal
Notes
• Test signal is input when INT SG on this
page is set to “ON” and setup menu item
710 is set to anything other than “Off”.
• When the system frequency is 23.98P, the
setting is fixed “HDSDI”.
F3: A1 INPUT
Selects the audio input signal to assign to
audio channel 1.
SDI:
Audio signal embedded into SDI signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
Note
Test signals are input to all audio channels
1 to 8 when INT SG on this page is set to
“ON” and setup menu item 808 is set to
anything other than “off”.
F4: A2 INPUT
Selects the audio input signal to assign to
audio channel 2.
SDI:
Audio signal embedded into SDI signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
F5: A3 INPUT
Selects the audio input signal to assign to
audio channel 3.
SDI:
Audio signal embedded into SDI signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
F6: A4 INPUT
Selects the audio input signal to assign to
audio channel 4.
SDI:
Audio signal embedded into SDI signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
Item
Setting
Item
Setting
F1: A5 INPUT
Selects the audio input signal to assign to
audio channel 5.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
F2: A6 INPUT
Selects the audio input signal to assign to
audio channel 6.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
F3: A7 INPUT
Selects the audio input signal to assign to
audio channel 7.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
F4: A8 INPUT
Selects the audio input signal to assign to
audio channel 8.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
F5: SPEAKER
Sets whether or not the built-in speakers
produce output.
OFF:
Not produce output.
ON:
Produce output.
F6: –
(Unassigned function button)
Item
Setting
F1: A5 VOL
Sets the volume of audio channel 5.
a)
The volume can be adjusted within the
range from
–200 to 0 to +200
(–
∞
to
+12 dB)
by turning the PUSH SET knob.
The volume changes in steps of ±10 if you
hold the SHIFT button down while you turn
the knob.
F2: A6 VOL
Sets the volume of audio channel 6.
a)
The volume can be adjusted within the
range from
–200 to 0 to +200
(–
∞
to
+12 dB)
by turning the PUSH SET knob.
The volume changes in steps of ±10 if you
hold the SHIFT button down while you turn
the knob.
F3: A7 VOL
Sets the volume of audio channel 7.
a)
The volume can be adjusted within the
range from
–200 to 0 to +200 (–
∞
to
+12 dB)
by turning the PUSH SET knob.
The volume changes in steps of ±10 if you
hold the SHIFT button down while you turn
the knob.
