Sony XDCAM EX PMW-EX3, Service Manual

Page: 34 / 314

2-8
PMW-EX3
2-2-8. AXM-36 Board, HN-349 Board
1. Refer to Section 2-2-5 and remove the
“Handle Top Cover Assembly”.
2. Remove the rubber switch key.
3. Remove the two screws (B2.6 x 6 : Silver),
and remove the out microphone bracket.
4. Disconnect the HN-349 board from the
connector (CN5) on the KSW-54 board.
5. Remove the four screws (P2.6 x 6 : Black),
and remove the AXM-36 board in the
direction of the arrow.
6. Disconnect the HN-349 board from the
connector (CN3) on the AXM-36 board.
AXM-36 board
KSW-54 board
CN5
CN3
HN-349 board
Out m icrophone
bracket
P2.6 x 6
(Black)
B2.6 x 6
(Silver)
P2.6 x 6
(Black)
Rubber switch key
7. Reinstall the removed parts by reversing the
steps of removal.
n
When installing the screws that were re-
moved in step 5, tighten them with the
specified tightening torque.
Tapping P2.6
x
6 tightening torque:
80
x
10
-2
±
0.15 N
.
m (8.0
±
1.5 kgf
.
cm)