Sony XDCAM EX PMW-EX3, Service Manual

Page: 38 / 314

2-12
PMW-EX3
7. Tighten the lock screw with specified torque.
Lock screw tightening torque:
95
x 10 -2
±
0.02 N . m (9.5
±
0.2 kgf . cm)
8. Install the lock lever to the lock screw so that
protrusion of the lock lever is positioned next
to protrusion of the arm case.
Lock screw
Protrusions are next
to each other.
Protrusions are next
to each other.
9. Apply a small amount of the thread locking
adhesive agent to the screw tip of the two
screws
a
.
10. While the state established by step 8 is
maintained, attach the two screws
a
.
Screw
a
tightening torque:
50 x 10
-2
±
0.05 N . m (5.0
±
0.5 kgf . cm)
n
Turn the lock lever fully counterclockwise
and confirm that the VF assembly can move
smoothly in the directions of A and B as
shown by the arrow.
[A]
[B]
Lock lever
Screws
a
VF assembly
11. Reinstall each part by reversing step 1.