Sony WLL-RX55, Maintenance Manual

Page: 21 / 230

1-13 (E)
WLL-RX55
S1
S101
S2
S201
S3
S4
S41
S42
S91
S92
S93
A
B C D E F G H J
K
1
2
3
4
5
AU-297 Board
AU-297 BOARD (A SIDE)
Ref. No. Name Description Factory setting
S1 R TALLY POWER/CONTACT Set these switches according to the signal POWER
S2 G TALLY POWER/CONTACT standard of the tally signal to be input from the
S3 R TALLY TTL/POWER INTERCOM/TALLY/PGM connector. *
S4 G TALLY TTL/POWER
S41 INCOM REMOTE/LOCAL Selects whether or not the intercom system is REMOTE
set with the RCP/MSU etc., connected outside.
REMOTE: Sets with the RCP/MSU etc.,
connected outside.
LOCAL: Sets with the switches on the
AU-297 board.
S42 INCOM PROD/PRIV/ENG Selects the line of the INTERCOM connector. PROD
PROD: Producer line
PRIV:
Private (Only the intercom between the
unit and a camera is possible.)
ENG: Engineer line
S91 PGM IN 0 dB/ _ 20 dB Sets the input signal level of the PGM (program 0 dB
audio) to either 0 dBu or _ 20 dBu.
S101 PROD INCOM SELECT Selects the intercom system of the producer line. 4W
4W:
4-wire system
RTS: RTS system
S201 ENG INCOM SELECT Selects the intercom system of the engineer line. 4W
4W:
4-wire system
RTS: RTS system
*
: Setting the tally system
Red tally Green tally
Switch S1 S3 S2 S4
Contact supply CONTACT — CONTACT —
24 V voltage supply POWER POWER POWER POWER
5 V voltage supply POWER TTL POWER TTL