1-18 (E)
WLL-CA55
4.
Remove the four screws from the connector plate
(68P).
5.
Disconnect the harnesses from the connectors CN3,
CN4, and CN5 on the CN-2494 board.
< Back view >
CN-2494 board
CN-2495 board
P2
x
4.5
P2
x
4.5
CN3
CN5
CN4
Connector plate
(68P)
1-10. Removing/Reinstalling the 68-pin
Connector (CN-2494/2495 Board)
n
The disconnections/connections of the fine pitch coaxial
cables are required for Removing/Reinstalling the 68-pin
Connector (CN-2494/2495 Board).
It is recommended to perform the disconnections/connec-
tions of the fine pitch coaxial cables in a clean place
(dustless location).
1.
Open the R panel assembly to remove the L panel
assembly. (Refer to Section 1-3.)
2.
Pull out the DPR-255 board and IF-936 board.
3.
Remove the five screws to remove the VPR bracket.
DPR-255 board
IF-936 board
VPR bracket
P2.6
x
6
P2.6
x
6
PSW
2.6
x
6
