33
GB
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,
however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu
as it is explained on page 30 and after selecting the "Manual Programme" option, press
OK
. Then press
v
or
V
to select the
AFT
option and press
b
. Next press
v
or
V
to adjust the fine tuning between -15 and +15. Finally
press
OK
twice to store.
d)
Improve the sound for individual channels in the case of distortion in mono broadcasts. (Not available when
“System” is set to “L”.)
Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when
watching mono programmes. The
Audio Filter
option allows you to reduce this effect.
If you do not experience any sound distortion, we recommend that you leave the
Audio Filter
option set
to
the
default
setting of “Off”.
To do this:
Once you have entered the “Set Up” menu as it is explained on page 30 and after selecting the “Manual
Programme Preset” option, press
OK
. Next, press
v
or
V
to select the
Audio Filter
option and press
b
. Next
press
v
or
V
to select
Off, Low
or
High
.
You can not receive stereo or dual sound when “Low” or “High” is selected.
e)
Skip any unwanted programme numbers when they are selected with the
PROG +/-
buttons.
To do this:
Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press
OK
. Next with the
Programme
option highlighted, press the
PROG +/-
button
to select the programme number you want to skip. When the programme you want to skip appears on the screen,
press
v
or
V
to select the
Skip
option and press
b
. Next press
v
or
V
to select
On
. Finally press
OK
twice to
confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
f)
View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart
1/
1
directly or through a VCR.
This option is only available depending on the country you have selected in the “Country” menu.
To do this:
Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press
OK
. Next press
v
or
V
to select the
Decoder
option and press
b
. Next press
v
or
V
to select
On
. Finally press
OK
twice to confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
TV Functions
