88
(GB)
Adjustments
Adjustments
4
Repeat steps
2
and
3
so that the core of a spot is located at the
center of the flare.
5
Select ALL again, then set the value to –80 so that the spot is
focused.
6
Select 4PA, then correct the vertical and horizontal distortion of the
spot.
7
Select 4PD, then correct the diagonal distortion of the spot.
8
Select 6PA and correct the vertical triangular-form distortion of the
spot.
9
Select 6PD and correct the diagonal triangular-form distortion of
the spot.
0
Repeat steps
6
to
9
so that the spot becomes a correct circle.
!¡
Select ALL, display the ME-pattern by pressing the PATTERN key,
and adjust so that the spot is in focus.
4
Adjust the AHP/DHP at corners of the screen. (in expert mode only)
For details, see “AHP/DHP adjustment” on page 89
(GB)
.
5
Press the PATTERN key repeatedly to display the ME-pattern.
6
Press the PO key once to enter the focus adjustment mode
for the upper parts (position No.2).
When you press the PO key, the part to be adjusted cycles
through the order as illustrated on the left. The position number is
displayed at the upper right corner.
If you press the POSITION – key, the part cycles through the reverse
order.
F O C U S A D J P O S I T I O N
- G - M G - V N o . 2
M G : [ 1 2 8 ]
A Q P : 1 2 8
D Q P : 1 2 8
SEL:
ADJ:
NEXT:
+ –
7
Adjust the focus and AQP/DQP for the upper part of the screen
(position No.2).
1
Press the
B
or
b
key so that the upper part of the screen is in focus.
2
Select AQP with the
v
or
V
key, and press the
B
or
b
key so that
the letters ME are clearly visible. (AQP adjustment)
3
Select DQP with the
v
or
V
key, and press the
B
or
b
key so that
the letters ME are clearly visible. (DQP adjustment)
4
Repeat steps
1
to
3
until the letters ME are in best focus.
Adjusting the Magnetic Focus
1
2
3
5
6
,
7
8
,
9
0
7
6
2
8
5
1
4
3
9
Summary of Contents for VPH-G90E
Page 161: ...Others 161 GB Others ...
Page 321: ...Divers 161 FR Divers ...