Sony VPH-G90E, Installation Manual

Page: 121 / 480

Adjustments
121
(GB)
Adjustments
Saving the Standard Registration Data
After adjusting all the registrations for the green, red and blue signals, save
the adjustment data as the standard data for the projector. The projector
automatically changes the registration data of every input memory
according to the standard data.
1
Hold down the MEMORY for more than 5 seconds.
“MEMORY DATA is saving!” is displayed while the projector saves
the registration data. When saving is complete, the following display
appears.
D o y o u w i s h t o e n t e r
i n t o t h e S T A N D A R D
D A T A S A V E M O D E ?
Y E S
N O
SEL: SET: ENTER
EXIT: MENU
2
Press the
v
or
V
key to select YES, then press the ENTER key.
If you select YES, the STANDARD DATA SAVE MODE display
appears.
S T A N D A R D D A T A S A V E M O D E
F O C U S D A T A
R E G I S T R A T I O N D A T A
SEL: SET: ENTER
EXIT: MENU
If you select NO, the registration adjustment mode is resumed.
3
Press the
v
key to select REGISTRATION DATA, then press the
ENTER key.
The registration data of all the input memory are changed according to
the standard data saved in step
1
.
Notes
• No keys function while the data is being saved.
• If the standard data save is performed, the registration data stored in
every input memory will be changed into the standard data. If necessary,
readjust the registration for each input signal.