Sony VPH-G90E, Installation Manual

Page: 142 / 480

142
(GB) Others
Others
List of the Projection Distance by Angle of Optical Axis Setting the Index Numbers
4
Press the MENU key to exit the menu mode.
To set the device index number
If you set the device index number, you can control each projector
individually with the supplied remote commander.
Set the device index number with the DEVICE INDEX switches on the
rear of the projector. Device index number “01” is set at the factory. Do
not change from “01” if the projector is used alone.
0 1
Notes
• Do not set the same device index number on multiple projectors in the
same system.
• Do not set the device index number to “00.” If you do, the projector
will be operated only with the keys on the control panel. It cannot be
controlled with the wired or wireless Remote Commander, or with an
external equipment via the PJ COM connector.
Notes on setting of the index number
• Set the same group index number for all equipment of the same
system connection (those on the signal route between the signal
source and the projector).
Ten’s digit Unit’s digit
Set the same group index number.
Set the different group index number
for two systems.
Set the same group index number.
PC-3000
PC-3000
Projector
PC-3000
Projector
Projector
Signal flow
Signal flow
Signal flow
*
Signal flow
*
*
*
*
*
PJ COM IN/OUT connections