18
Operations
To shoot a three-dimensional object
To shoot and display a three-dimensional object, let
down the camera stand. You can also shoot it from
one angle.
Using the accessory shoe for an LCD
monitor
This unit has an accessory shoe for attaching an LCD
monitor.
Controlling the VID-P110 From a
Computer
You can control the VID-P110 from a computer
connected by an RS-232C connector. However, the
software to control the VID-P110 must first be
installed. Refer to the “Interface Manual” for details
on the communication protocol for this software.
12 degrees
22 degrees
240 degrees
to left
60 degrees
to right
Let down the
camera stand.
Shoot the object
from one angle.
Shoot the object
from the top.
Tighten the lock knob.
Changing the camera direction
The VID-P110 allows you to tilt the camera upwards
through 90 degrees, and move it from left to right, or
up and down. Therefore, you can shoot and display
the audience, students, or even yourself. To shoot an
object far away from the VID-P110 itself, tilt up the
camera and remove the close-up lens.
To remove the close-up lens
Revolve.
Close-up lens
90 degrees
Tilt up the camera
until it clicks.