11
Connecting the Unit to Other Equipment
Notes on connections
• Before making any connections, turn off the power of
the VID-P110 and the equipment to be connected.
Example of connections to this unit
a)
Note
It is recommended that you use the DIN 4-pin cable
when you connect this unit to the equipment with an S
video input or output connector.
• For NTSC model only: Before connecting a device
such as a monitor to the VID-P110 AC OUT
receptacle, check to see if the power consumption is
2.5 A or less. Do not connect any device whose
power consumption is over 2.5 A to the VID-P110.
Microphone
MIC
VID-P110 (Front)
AC inlet
AC outlet
AC power cord (supplied)
AC IN
AC OUT (NTSC
model only)
VIDEO OUT 1
(phono jack)
Video cable
Video input
connector
Color monitor
VID-P110
(Rear panel)
S VIDEO IN 1 or 2
AUDIO L, R
1 or 2
S VIDEO OUT
S video input
connector
DIN 4-pin cable
a)
VIDEO IN
1 or 2
VIDEO OUT 2
(BNC type)
Video input connector
Video cable
AUDIO L and
R OUT
Audio cable
Audio
input connectors
DIN 4-pin cable
a)
or
Video
cable
Audio cable
S video
output
connector
Video
output
connector
Audio output
connectors
AC power cord (not supplied)
Front
Rear
or
Video equipment
Projector
Screen
Speaker
Amplifier
