Sony VAIO VGX-XL201 User Manual Download

Page: 119 / 153

119

Troubleshooting

Computer

What should I do if my computer does not start?

❑

Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows
the power is on.

❑

Make sure the optical disc drive is empty.

❑

If your computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS
is plugged into a power source and turned on.

❑

Make sure your display is plugged into an appropriate power source and turned on.

❑

Make sure the brightness and contrast controls on your display are adjusted correctly.

❑

Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.

❑

Remove any extra memory modules you may have inserted since purchase.

❑

Make sure your computer is not in Standby mode by pressing the Standby button on the wireless keyboard or the remote
commander.

Summary of Contents for VAIO VGX-XL201


























































































































































Search results

Summary of Contents for VAIO VGX-XL201

Reviews:

Related manuals for VAIO VGX-XL201

Brands by name

Popular brands

Sony VAIO VGX-XL201, User Manual

Search results

Summary of Contents for VAIO VGX-XL201

Reviews:

Related manuals for VAIO VGX-XL201

Brands by name

Popular brands