Sony VAIO VGX-XL201 User Manual Download

Page: 69 / 153

Using Peripheral Devices

Disconnecting a USB floppy disk drive

You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is
in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.

If the computer is off, you can unplug the USB cable directly from the computer.

To disconnect a USB floppy disk drive

Close all programs accessing the floppy disk drive.

Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.

Select the floppy disk drive you want to unplug.

Click Stop.
The Stop a Hardware device window appears.

Make sure the floppy disk drive is selected, and click OK.
A message appears stating it is now safe to remove the hardware device.

Click Close to close the Safely Remove Hardware window.

Disconnect the floppy disk drive from the computer.

Summary of Contents for VAIO VGX-XL201


























































































































































Search results

Summary of Contents for VAIO VGX-XL201

Reviews:

Related manuals for VAIO VGX-XL201

Brands by name

Popular brands

Sony VAIO VGX-XL201, User Manual

Search results

Summary of Contents for VAIO VGX-XL201

Reviews:

Related manuals for VAIO VGX-XL201

Brands by name

Popular brands