background image

116

n

N

Precautions

On Using Headphones

Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud 
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

 

On Handling Memory Stick Media

Do not use the media in a location subject to static electricity or electrical noise.

Do not touch the Memory Stick media connector with your finger or metallic objects.

Use only the adhesive label supplied with the Memory Stick media as a label.

Do not bend, drop, or apply strong shock to the Memory Stick media.

Do not disassemble or modify Memory Stick media.

Do not let Memory Stick media get wet.

Do not use or store Memory Stick media in a location subject to:

Extremely high temperatures, such as in a car parked in the sun

Direct sunlight

High humidity

Corrosive substances

Use the storage case supplied with the Memory Stick media.

Be sure to make a backup copy of your valuable data.

Keep the Memory Stick media out of reach of children. There is a risk of swallowing the media.

When using the Memory Stick Duo media, do not use a fine-tipped pen to write on the label adhered to the Memory Stick 
Duo media. Exerting pressure on the media may damage internal components.

Summary of Contents for VAIO VGX-XL201


























































































































































Reviews: