120
Troubleshooting
What should I do if a BIOS error appears when I turn on my computer?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of your computer screen, follow these steps:
1
Press the F2 key.
The BIOS setup screen appears.
2
Set the date (month/day/year). Press the Enter key.
3
Press the
m
key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
4
Press the
,
key to select the Exit tab, select Load Setup Defaults, and press the Enter key.
The message Load Setup Defaults (Y/N)? appears.
5
Select Yes, and press the Enter key.
6
Select Exit (Save Changes) or Exit Setup, and press the Enter key.
The message Save configuration changes and exit now? appears.
7
Select Yes, and press the Enter key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
What should I do if the power indicator (Green) lights but my computer screen stays
blank?
Follow these steps:
1
Press and hold the power button for more than four seconds to check that the power indicator goes out. Then turn on your
computer again.
2
If your computer screen still stays blank, unplug the power cord and leave the computer for about a minute. Then plug in
the power cord and turn on the computer again.
