Sony VAIO PCV-A21M User Manual Download

Page: 62 / 88

Upgrading your VAIO computer

User Guide

Locate the notch on the bottom edge of the memory module.

Align the memory module over the slot, making sure the module is facing the
correct way.

Press evenly against the memory module's upper corners. The end latches
snap into position automatically, as shown.

Align the tabs on the side cover to the rim of the unit and press the side cover
firmly against the unit until it snaps into place.

✍

The illustrations here may vary from the actual configuration of your VAIO.

Use only the memory modules specified on the printed

Specifications

sheet.

To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure. The module is properly inserted when the side
latches click into place.

Summary of Contents for VAIO PCV-A21M

























































































Search results

Summary of Contents for VAIO PCV-A21M

Reviews:

Related manuals for VAIO PCV-A21M

Brands by name

Popular brands

Sony VAIO PCV-A21M, User Manual

Search results

Summary of Contents for VAIO PCV-A21M

Reviews:

Related manuals for VAIO PCV-A21M

Brands by name

Popular brands