background image

31

n

N

Using your VAIO computer

User Guide

Troubleshooting floppy disks

My floppy disk drive cannot write to a floppy disk

The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not write-protected.

Check that the disk is properly inserted into the floppy disk drive.

Your disk may be corrupt. Try to insert another floppy disk.

If you have problems with your floppy disks, check the printed 

Troubleshooting

 

Guide

 and the VAIO-Link website

(

www.vaio-link.com

).

Using the modem

Your VAIO desktop is equipped with an internal modem. Use the single RJ-11 jack 

 to connect the supplied modem cable to the 

phone line. Once you have connected the phone line and registered with an Internet Service Provider, you can take advantage of 
online services and the Internet, to register your computer and software online, and to contact VAIO-Link.

Troubleshooting the modem

If you have problems with your modem, check the printed 

Troubleshooting

 

Guide

 and the VAIO-Link website (

www.vaio-link.com

).

Summary of Contents for VAIO PCV-A21M

























































































Reviews: