Sony Vaio PCG-745 User Manual Download

Page: 51 / 103

Sony Notebook Computer User Guide

Make sure the docking station lever is in the

RELEASE

position.

Align the guide posts on the docking station with the openings on the
back of the computer, and then slide the computer in the direction of
the arrow until it stops.

Slide the docking station lever into the

LOCK

position to secure your

computer in the docking station.

Plug the cable attached to the AC adapter into the

DC IN

connector on

the docking station. Plug the power cord into the AC adapter and an
AC outlet.

✍

Use the AC adapter supplied with your docking station or the Sony optional PCGA-AC7/
AC71 adapter.

Guide posts

Docking station port

Docking station

lever

IN USE indicator

AC adapter

Power cord

Summary of Contents for Vaio PCG-745








































































































Search results

Summary of Contents for Vaio PCG-745

Reviews:

Related manuals for Vaio PCG-745

Brands by name

Popular brands

Sony Vaio PCG-745, User Manual

Search results

Summary of Contents for Vaio PCG-745

Reviews:

Related manuals for Vaio PCG-745

Brands by name

Popular brands