Sony VAIO MicroNotebook PCG-505G User Manual Download

Page: 49 / 89

VAIO MiniNotebook Computer User Guide

Connecting an External Mouse and Keyboard

You can use the port replicator to connect an external mouse and
keyboard to your computer. The Mouse and Keyboard connectors require
a PS/2™-style plug or adapter.

To connect an external mouse and keyboard

Turn off the computer.

Use the

and

symbols to locate the Mouse and Keyboard

connectors.
Plug the mouse cable and keyboard cable into these connectors with
the mark facing up.

✍

See “Using the Keyboard” on page 16 for more information on using the keyboard.

See the manual that came with your mouse or keyboard for more information on
installation and use.

Before you connect or disconnect the mouse or keyboard, turn off the computer.

Before connecting a mouse to the Serial port, make sure the mouse is compatible with a
Serial port.

You cannot use the built-in touchpad and an external mouse at the same time.

➠

Mouse

Keyboard

to Mouse

Keyboard

to your computer

Summary of Contents for VAIO MicroNotebook PCG-505G


























































































Search results

Summary of Contents for VAIO MicroNotebook PCG-505G

Reviews:

Related manuals for VAIO MicroNotebook PCG-505G

Brands by name

Popular brands

Sony VAIO MicroNotebook PCG-505G, User Manual

Search results

Summary of Contents for VAIO MicroNotebook PCG-505G

Reviews:

Related manuals for VAIO MicroNotebook PCG-505G

Brands by name

Popular brands