Sony VAIO MicroNotebook PCG-505G User Manual Download

Page: 41 / 89

VAIO MiniNotebook Computer User Guide

Connecting the CD-ROM Drive

You can use the supplied PCGA-CD5 CD-ROM drive with your notebook
computer.

To connect the CD-ROM drive

Turn off your computer.

Remove the PC card slot protector from the PC card slot. See “Using
PC Cards” on page 26 for details.

Connect the CD-ROM drive cable to the PC card supplied with the
CD-ROM drive.

Insert the PC card into the PC card slot with the label side facing up.
See “Using PC Cards” on page 26 for details.

✍

The pick-up cover is attached to the lens of the CD-ROM drive at the factory setting.
Remove it before using the CD-ROM drive.

PC card

CD-ROM
drive cable

(supplied with

CD-ROM drive)

Interconnection cable

(SELV according to EN 60950)

Summary of Contents for VAIO MicroNotebook PCG-505G


























































































Search results

Summary of Contents for VAIO MicroNotebook PCG-505G

Reviews:

Related manuals for VAIO MicroNotebook PCG-505G

Brands by name

Popular brands

Sony VAIO MicroNotebook PCG-505G, User Manual

Search results

Summary of Contents for VAIO MicroNotebook PCG-505G

Reviews:

Related manuals for VAIO MicroNotebook PCG-505G

Brands by name

Popular brands