Sony UP-D2600, Service Manual

Page: 92 / 132

3-18
UP-D2600/V1(E)
NG command NG data Contents of NG Board/REF Check item
h’ E1 h’ 51 LOAD_TMG_TIMEOUT SE-427 board/PH501 . Connector is disconnected.
h’ 52 LOAD_TNG_FGOUT SU-39 board . Motor / sensor are defective.
h’ 53 LOAD_PAPER_TIMEOUT1 . There is no sensor sensitive by mistaken
h’ 54 LOAD_PAPER_TIMEOUT2 assembling the mechanism
h’ 58 EJECT_TMG_TIMEOUT SE-428 board/PH550 . Connector is disconnected, and parts are
defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
h’ 61 CHUCK_ERROR SE-422 board/PH250 . Connector is disconnected, and parts are
h’ 62 PP_JAM_ERROR defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
NG Command List 2
A way of looking the list: In case of h ‘ 0A = 0000 1010 (Refer to HEX code converting as binary code.)
NG sensor is the first bit (PLT_CV) and third bit (PP_SIZE sensor)
NG _CODE2
NG command NG bit Contents of NG Board/REF Check item
h’ E2 bit 6 LOAD_TMG sensor SE-427 board/PH501
.
Connector is disconnected.
bit 5 EJCT_TMG sensor SE-428 board/PH550 . Parts are defective.
bit 4 RBN_CST sensor Pushbutton SW . The sensor becomes ON by mistaken
bit 3 PP_SIZE sensor SE-426 board/PH450 assembling the mechanism.
bit 2 PAPER sensor SE-426 board/PH451
bit 1 PLT_CV sensor SE-419 board/S150
bit 0 KICK_OUT sensor SE-430 board
NG_CODE3
NG command NG bit Contents of NG Board/REF Check item
h’ E4 bit 6 Head thermistor Thermal head . Connector is disconnected.
bit 5 Head thermistor . Thermal head
bit 4 Room thermistor PRT-11 board/TH1 . Parts are defective.
bit 3 Room thermistor
bit 2
bit 1 EEPROM ERROR SE-417 board/IC1
.
Connector is disconnected.
bit 0 EEPROM ERROR . Parts are defective.