manualshive.com logo in svg

Sony UP-D2600, Service Manual

Share
Download
Sony UP-D2600 Service Manual Download Page 5

3

UP-D2600/V1(E)

Purpose of this manual

This manual is the service manual Vol.1 of the Digital Color Printer UP-D2600S/
D2600.

This manual is intended for use by trained system and service engineers, and
describes the information for maintenance and detailed service.

Related manuals

Besides this Service Manual Vol.1, the following manual is available for the

UP-D2600S/D2600.

.....

Service Manual Vol.2

Part No. 9-955-195-21 (for J, UC, CE)

Contains the semiconductor pin assignments, spare parts, block diagrams,
schematic diagrams and board layouts.

.....

“Semiconductor Pin Assignments” CD-ROM (Available on request)

This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in B&P Company equipment.

Semiconductors that cannot be searched for on this CD-ROM are listed in the
service manual for the corresponding unit. The service manual contains a com-
plete list of all semiconductors and their ID Nos., and thus should be used together

with the CD-ROM.
Part number: 9-968-546-XX

Trademarks

A trademark and registered trademark used in this manual is follows.

Windows 98 and Windows 95 are registered trademarks of Microsoft Corporation.

Manual Structure

Summary of Contents for UP-D2600





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands