Sony STR-ZA1000ES User Manual Download

Page: 108 / 187

status of the receiver.

Remote sensor

Receives signals from remote control.

MASTER VOLUME

Turns to adjust the volume level.

HDMI jack cover (for STR-ZA3000ES/STR-ZA2000ES only)

Open the cover when you use HDMI IN 6 (GAME) jack.

Without the front cover

Fixing point of the front cover

Attaches the front cover using this fixing point.

PING

Displays the IP address and MAC address on the display panel.

Input buttons

Select the device you want to use.

TONE MODE

TONE+/–

Press to adjust the bass/treble level of the speaker.

SPEAKERS

Switch to OFF, A, B, A+B of the front speakers.

AUTO CAL MIC jack

Connect the supplied optimizer microphone for Auto Calibration to this jack.

HDMI OUT

Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B

jacks.

SETTING

(USB) port

Used for maintenance and service.

ZONE CONTROL (ZONE2, ZONE3)

Selects the place where you will control.

10.

MEMORY

Press to store a station during tuner operation.

Summary of Contents for STR-ZA1000ES




























































































































































































Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands

Sony STR-ZA1000ES, User Manual

Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands