Sony STR-DA3500ES Operating Instructions Manual Download Page 64

Page: 64 / 148

D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\060SUR.fm

masterpage: Left

STR-DA3500ES
4-144-907-

(1)

Tips

• For details on HD-D.C.S. technology, see

“Glossary” (page 132).

• When a sound field with HD-D.C.S. is selected, the

HD-D.C.S. lamp lights up on the display window.

To turn off the surround effect
for MOVIE/MUSIC

Select “2ch Stereo” or “A.F.D. Auto” in the
Surround settings menu.

Resetting sound fields to
the initial settings

Be sure to use the buttons on the receiver for
this operation.

Press POWER to turn off the
receiver.

While holding down MUSIC,
press POWER.

“S.F. CLEAR” appears on the display
window and all sound fields are reset to
their initial setting.

POWER

MUSIC

Summary of Contents for STR-DA3500ES





















































































































































Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands

Sony STR-DA3500ES, Operating Instructions Manual

Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands