Sony STR-DA3500ES Operating Instructions Manual Download Page 100

Page: 100 / 148

100

D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\090OTH.fm

masterpage: Left

STR-DA3500ES
4-144-907-

(1)

Shuffle (

TDM-iP50

only)

Plays all the tracks in random order.
• Off

Deactivates the shuffle play mode.

• Albums

Plays all the tracks on an album in random
order.

• Songs

Plays all the tracks in “Songs” in random
order.

Audiobook Speed (

TDM-iP50

only)

Selects the display speed of the Audiobook.
• Low

Slows the display speed.

• Normal

Sets the display speed to standard.

• High

Increases the display speed.

List Mode (TDM-NC1 only)

Selects a range of tracks to be played back.
• Genre

Plays back tracks in the selected genre.

• Artist

Plays back tracks of the selected artist.

• Album

Plays back tracks in the selected album.

Tip

The List Mode can be used with the Function List
menu even when the list is displayed.

DIGITAL MEDIA PORT message
list

TDM-NC1 only.

Message appears Explanation

No Adapter

The adapter is not connected.

No Device

There is no device connected
to the adapter.

No Audio

No audio file was found.

The data is being read.

No Server*

There is no server connected.

No Track*

No track was found.

No Item*

No item was found.

Connecting*

Connecting to the server.

Configuring*

The network is setting up.

Warning*

Check the display of the
DIGITAL MEDIA PORT
adapter.

Party Mode*

The unit is currently in party
mode “Guest”.

Searching*

Searching the server.

Summary of Contents for STR-DA3500ES





















































































































































Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands

Sony STR-DA3500ES, Operating Instructions Manual

Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands