96
US
D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\090OTH.fm
masterpage: Left
STR-DA3500ES
4-144-907-
11
(1)
2
Press ZONE.
The remote switches to zone 2 or zone 3
mode.
Change the zone setting of the remote to
zone 2 or zone 3 in advance (page 95).
3
Turn on the amplifier in zone 2
or zone 3.
4
Press one of the input buttons
on the remote to select the
source signals you want to
output.
For zone 2, analog video and audio
signals are output. For zone 3, only
analog audio signals are output. When
you select SOURCE, the signals of the
current input are output.
5
Adjust to a suitable volume.
• In the case of illustration 1-
1
(page 91).
Adjust the volume using MASTER
VOL +/– on the remote.
• In the case of illustration 1-
2
(page 91), adjust the volume using the
receiver of zone 2.
• In case of illustration 2 (page 92), adjust
the volume using the receiver of zone 3.
Tips
• Even when this receiver is in standby mode (press
?
/
1
on the remote to turned off this receiver), the
receiver in zone 2 and zone 3 remains turned on. To
turn off all receivers, press
?
/
1
and AV
?
/
1
on the
multi function remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
OUT or ZONE 3 OUT jacks. No signals are output
from components connected to only the digital
input jacks. You cannot select some input
according to the selected zone.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi channel input is selected.
Converting analog video
input signals
This receiver allows you to convert the
resolution of analog video input signals.
Press RESOLUTION repeatedly.
Each time you press the button, the resolution
of the output signals will be changed.
You can also use “Resolution” in the Video
settings menu.
Other Operations
RESOLUTION
Summary of Contents for STR-DA3500ES
Page 147: ......
