Sony STR-DA3500ES Operating Instructions Manual Download Page 99

Page: 99 / 148

D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\090OTH.fm

masterpage: Right

STR-DA3500ES
4-144-907-

(1)

Other Oper

ations

To operate the TDM-iP50 using
the iPod menu

Make sure that “iPod” is selected in step 5 in
“Selecting an operation screen to operate the
component connected to the DIGITAL
MEDIA PORT adapter” (page 97).
For details on operating the iPod, refer to the
operating instruction supplied with the iPod.

During playback of the track selected, the
displayed screen changes depending on the
DIGITAL MEDIA PORT adapter connected.

You can also operate the components
connected to the DIGITAL MEDIA PORT
adapter using the following play mode buttons
on the remote of the receiver.
Press DMPORT on the remote to enable
DMPORT operation.

When a TDM-iP50 is connected, the receiver
enters pause mode when

is pressed.

** Fast-backward/forward while pressing and

holding the

button.

Option parameters in the play
modes

Repeat Mode (

TDM-iP50

only)

Plays one or all the track repeatedly.
• Off

Deactivates the repeat play mode.

• One

Plays one track repeatedly.

• All

Plays all the tracks repeatedly.

Playing back the track selected

TDM-iP50

TDM-NC1

Do the following

Play

Press

Pause

Press

. To resume play,

press the button again.

Stop

Press

Find the beginning of a
track during playback, or
find the beginning of the
previous track

Press

Find the beginning of the
next track

Press

Skip to the previous
album

Press

•.

Skip to the next album

Press •

Go backward/forward

Press

.**

continued

Summary of Contents for STR-DA3500ES





















































































































































Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands

Sony STR-DA3500ES, Operating Instructions Manual

Search results

Summary of Contents for STR-DA3500ES

Reviews:

Related manuals for STR-DA3500ES

Brands by name

Popular brands