2-25 (E)
SRX-T615
2-4. Image Adjustment (3D Lens)
The optical axis adjustment, zoom adjustment, focus adjustment, position adjustment, brightness adjust-
ment and registration and calling of adjustment/setting data (FUNCTION MEMORY function) are de-
scribed here.
Each adjustment is performed in a 3D mode. Therefore, install the 3D lens before adjustment when using
2D and 3D lenses jointly.
Perform gamma and uniformity adjustments using a Projector Color Adjustment Tool and 2D lens before
image adjustment when using this unit by only a 3D lens.
This adjustment is not required when using this unit by only a 2D lens.
2-4-1. Optical Axis Adjustment
The optical axis in the 3D lens is adjusted so that the image for the left eye is projected from the lower
lens and the image for the right eye is projected from the upper lens.
1. Start the SRX Controller.
2. Select “Single 3D HDMI-1(L/R)”, “Single 3D HDMI-2(L/R)”, or “Single 3D HDMI-1(L)/2(R)” in
[INPUT SELECT].
The current state enters a 3D mode.
3. Click the [INSTALLATION] tab.
4. Click the “Frame Adjust” radio button in [Single 3D] of [TEST PATTERN].
A test signal is displayed.
Screen example
[INSTALLATION] tab
[TEST PATTERN]
[INPUT SELECT]
