Sony SRX-R320, Service Manual

Page: 45 / 406

1-37 (E)
SRX-R320
Fig. 1-4-13
PSW4
x
40
Helical compression
spring
Spacer pipe
Cold mirror assembly
PSW3
x
6
Cold mirror
Notch
Mirror spring
Mirror spring
Cold mirror assembly
Screw
(with
drop-safe)
1-4-13. Cold Mirror
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U3). (Refer to Section 1-3-4.)
4. Loosen the screw (with drop-safe).
5. Remove the screw (PSW4
x
40), the helical compres-
sion spring and the spacer pipe, then remove the cold
mirror assembly.
6. Remove the three screws (PSW3
x
6), then remove the
three mirror springs and the cold mirror.
7. To install, reverse the removal procedure.
m
.
When attaching the cold mirror, pay attention to the
direction of it.
.
When attaching the cold mirror, be careful not to
damage or soil it.